background image

Important Safety Instructions 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE UNIT. NO USER 
SERVICABLE PARTS INSIDE: REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Precautions for use

  Check that the operating voltage of your unit is within the range of your local 

power. CD5300 requires AC voltages from 100 to 240 Volt.  Connecting to a too 
high voltage causes severe damage and may even cause fire, electrical shock 
or explosion! 

  Warning: CD5300 has high voltages inside! Do not open! 

  Should any liquid or solid object fall into the cabinet, unplug the unit and have it 

checked by qualified personnel before operating it any further.

 Sometimes in summer you have faults in your local power supply due to overloading. 

Unplug the unit from the wall outlet when there is a thunderstorm.

  Unplug the unit from the wall outlet if it is not to be used for an extended period of 

time. To disconnect the power cord, pull it out by grasping the plug. Never pull the 
cord itself. Refer servicing to qualified personnel only.

  Unplug the unit from the wall outlet before connecting other units or opening the unit.

  If there is any break or cut in the AC-line cord, unplug it from the wall outlet and 

replace it by a new one!

Location

  Do not install the unit in a location near heat sources such as radiators or air ducts, or 

in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. 
Leave space around this unit for heat dissipation.

Condensation

  When this unit is brought into a warm room from previously cold surroundings or when 

the room temperature rises sharply, condensation may form inside, and the unit may 
not be able to attain its full performance. In cases like this, allow the unit to stand for 
about an hour or raise the room temperature gradually.

Fuses

 The fuses are inside of the unit and should be changed by qualified personnel only.

Caution

  Changes or modifications to this equipment not expressly approved by CEC Co., Ltd. 

for compliance will void the user’s warranty. 

Summary of Contents for CD5300









Reviews: