C-Dax pasture meter+, Operation Manual

Page: 23 / 38

16
Maintaining Your Pastu
Whilst the equipment has been designed to withstand the purpose for which it is
intended, regular inspection and timely attention to any necessary maintenance
will reduce the likelihood of equipment failure in the field.
Please remember: How you treat it, is how it will treat you.
1. Regularly check all sled bolts to ensure they are tight.
2. Regularly check that the 4 bolts attaching the drawbar to the sled are tight.
3. Do not adjust the screws which bolt the sensor together. These
screws are torque set and sealed against the ingress of water. The lid is
also sealed in place with sealing compound. Note: Removal of any of
these screws will void the product warranty ! .
4. Regularly inspect the two strips of polycarbonate on either side of the
sensor uprights for damage and signs of water ingress. Evidence of
condensation on the inside of the polycarbonate indicates the presence of
moisture. If moisture is present internally, return the sensor to C-Dax for
inspection immediately.
5. Do not direct high pressure water around the black sensor on the unit.