9
CALIBRATION
Magnesium Oxide powder is applied at a rate determined by the number of cows to be treated. When
spreading this product, calculate the weight of powder to be applied and apply this amount with the
adjustment stop pin in position 1-5. Use the table below to work out which setting is most appropriate.
Magmaster 65L
Nominal application rates (grams/m
2
) for Magnesium Oxide spread at 10Kph
Adjustment Stop Pin
Application Rate (g/m
2)
Low
1
1.6
2
2.7
3
3.8
4
8.2
High
5
12.6
Magmaster 165L
Nominal application rates (grams/m
2
) for Magnesium Oxide spread at 10Kph
Adjustment Stop Pin
Application Rate (g/m
2)
Low
1
0.6
2
1.5
3
2.5
4
4.5
High
5
8.2
NOTE
Because of variations in product characteristics, speedometer calibration and driving speed, the information
in the calibration guide should be regarded as a starting point only.
