Page 9
CCRadio2E
Getting Started
POWERING YOUR RADIO
Before powering your radio be sure to read the Safety Instructions
on pages 4 through 6.
The CCRadio2E will run on (4) “D” size NiMH or alkaline batteries or on
120V AC house current using the included power cord. Batteries are
optional. The batteries are necessary to retain the timer, clock, and
memory settings if the power cord is removed from the radio for more than
three minutes. Lithium batteries are not recommended.
Rechargeable batteries work well in this radio. The Battery Power Level
Indicator will be lower because the total voltage is lower for recharge able
batteries.
AC OPERATION
Before you plug the AC cord into the radio be sure the AC voltage is
120Volts/60Hz. If you have batteries in the radio and you use the AC power
cord, the batteries will automatically be disconnected.
Note:
If you remove the power cord without turning the radio OFF, the
radio will automatically revert to the batteries.
Insert the plug on the end of
the supplied power cord
securely into the AC power
jack on the back of the radio
as shown.
Back of Radio
