Page 19
CCRadio2E
Radio Operation
RESET
DISPLAY LIGHT ON AC POWER
When the radio is plugged into AC power, the display light will
always be on unless you turn it off. The special green LED bulbs
last about 100,000 hours and use very little electrical energy. The
display light has three light levels. If you want to change the light level or turn
off the display light, press and release the Light button until you reach the
desired level. Refer to page 8 for button identification.
DISPLAY LIGHT ON BATTERIES
When batteries are used, the display light can be turned on by pressing the
light button. The display light automatically goes off 2 minutes after the last
time you press any button.
LOCK SWITCH
The Lock switch can be used when transport ing the
radio to prevent accidentally turning it on. When the
switch is pushed up you will see the Lock symbol
appear on the display. It can also be used to
disable all functions of the radio when it is turned
on.
Push the switch down to release the lock for
normal operation.
HEADPHONE JACK
You can use a stereo or mono headphone with a 1/8”
(3.5 mm) plug. When you insert the headphone plug,
the speaker is discon nected. This radio delivers FM
in stereo through the headphones.
RESET BUTTON
Once in a while glitches may occur on any portable digital radio. This can be
caused by static electricity, unusual key strokes or a power dis ruption.
If this happens, use the end of a paper clip and push it into the hole briefly to
reset the radio.
You will lose the clock time and all the stations stored in
memory when the radio is reset.
Lock
Switch
Headphone
Jack
Right Side View
Bottom View
