Page 14
CCRadio2E
Radio Operation
TUNING
The CCRadio2E features four bands: AM / FM / 2-Meter Ham (VHF) and
Weather (WX).
Manual Tuning
1) Press the Power Button to turn on the radio.
2)
Select the band by pressing the
BAND/AUX
button on the top panel.
3) A single press of the Up or Down Tuning Buttons
will change
the frequency up or down for AM, FM and Ham (VHF) bands, and
channel up or down for Weather.
Each press of Up and Down Tuning Buttons will change the frequency by
10 kHz in AM mode, 100 kHz in FM mode, and 5 kHz in Ham (VHF).
Scan Tuning
Same as above except press and hold the Tuning Up or Down
Button for more than 0.5 second. The radio will scan and stop automatically
when it finds an active station. The Scan Tuning will not work on the
weather band. It may also stop scanning on strong interference or noise.
Press and hold again to resume. For 2-Meter Ham scanning, please see
page 17 for more advanced information.
Rotary Tuning
Rotating the tuning knob will change AM/FM/Ham (VHF) by frequency and
the weather band by channel.
Memory Tuning
Five stations may be stored into memory in each of the four bands.
1) Tune to the station or channel you want to memorize. Wait 5 seconds
for best tuning.
2) Press and Hold the desired Memory Button for two seconds or until you
hear a beep. The station or channel is then memorized.
The display will show the memory number.
To recall the memorized station, select the correct band and briefly press
and release the Memory Button. The radio will instantly tune to the station
stored in memory.
NOTE:
The large buttons on top of the radio make it easy to locate your
favorite station. Very high quality switches are used in manufacturing, so a
light touch is all you need to save and restore your favorite stations.
Memory buttons on
Top of Radio
