Wiser Home Controller Installation Instructions
34
6.0
Additional Information
6.1
Using Static TCP/IP Settings on the PC (if necessary)
When possible, use the automatic IP setting feature (DHCP enabled). Use
static IP addressing when a fixed IP address is needed. The following steps
might be necessary for your installation.
Windows 2000 or Windows XP
1. Connect the PC cable to an unused LAN port on the Wiser Home
Controller. Apply power to the router and allow it to initialise.
2. Click Start; click Settings and then click Control Panel.
3. Double-click the Network Connection icon.
4. Right-click the Local Area Connection icon and then click
Properties. The Local Area Connection Properties window appears.
5. Under the General configuration tab, locate and select TCP/IP with
the corresponding network card, and then click Properties. The
Internet Protocol (TCP/IP) Properties window appears.
6. Click Use the following IP Address and enter:
IP Address: 192.168.2.10 (see
Note )
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
Note:
Provide a unique address that does not conflict with any other
device on the LAN.
