time start. Press the * key followed by the 9 key, then press the 4 key. The
buzzerwill emit a low level steady tone.
As you test each device the internal sounder will give a loud pulsing tone to
indicate the correct operation of that device. The zone number LED will light.
When the device tested clears the sounder will stop and the zone LED will go
out. The buzzer will emit a low level steady tone as before.
Report any faults to your alarm installation company.
Press the * key to finish.
The following is given so a record of your zone configurations can be made.
simply fill in where each zone is located in your premises.
THE FOLLOWING IS PROVIDED TO GIVE QUICK ACCESS TO VARIOUS
PEOPLE IF A PROBLEM OCCURS
This manual is from
http://groups.msn.com/UKSecurityPanels
Technical Manuals Online! - http://www.tech-man.com
