Areas
7
58
Using the Zone Status Menu
How To Use the
Zone Status Menu:
1.
From the Area Status Menu,
press and hold the
[quick view] key for 2 seconds
until you hear two beeps.
Then, press the area number.
You see something like this:
.F.F.B
■■■■■■■■■■
■■■■■■■■■■■■■■
The display identifies each
zone's status, using the abbre-
viations to the left. Zones out-
side of the area are blacked out.
2.
To bypass a faulted zone,
press the
key fol-
lowed by the two-digit zone
number.
3.
To remove the bypass on a
zone, press the
key
followed by the zone number.
4.
To exit, press the
key twice.
The Zone Status Menu tells you
if the zones of an areas are nor-
mal, faulted or bypassed. De-
pending on your system's pro-
gramming, you may only be
able to view the Zone Status
Menu for those areas to which
you have rights.
The Zone Status Menu uses the
following abbreviations to sum-
marize a
zone's
status:
. = Normal
. The zone is
ready to be armed.
B = Bypassed
. The zone
was bypassed.
F = Faulted.
The zone's sen-
sor is faulted.
Summary of Contents for S5010
Page 1: ...Using Your Security System With Alphanumeric Keypad S5010 S5011 S5012...
Page 68: ...64 8 Notes Notes...
Page 69: ...65 8 Notes Notes...
Page 70: ...66 8 Notes Notes...
