background image

2

User Codes

13

Changing Kidwatch Days.

You have the option of chang-
ing which days Kidwatch is in
effect.  To do so, follow the pro-
cedure on the previous page.

Reviewing Kidwatch Use.

You can review the times that
Kidwatch Codes were used to
arm and disarm your system by
viewing Event Memory.  See
Section 6 for more information.

Turning Kidwatch on and off.

Kidwatch can be turned on and
off.  When Kidwatch is turned
off, you are no longer notified
of the use of the Kidwatch
Code.  Otherwise, the code
works as before.  If you turn the
Kidwatch Code on or off, it re-
mains that way until you
change it back.

Kidwatch Setup.

  See Section

8 for the specifics of how the
Kidwatch Code was set up on
your system.

To Turn Kidwatch On/Off:

1.

Press and hold the 

[kidwatch] key for 2 seconds

until you hear two beeps. You

see:

ENTER MASTER
USER CODE 

   

2.

Enter the master user code.

You see something like this:

SMTWTFS8 1234567
    E SMTWTFS

If there is an "E" under the

"8," the Kidwatch Code is en-

abled (on).  If you see a "D,"

the Kidwatch Code is dis-

abled (off).

3.

To switch the Kidwatch Code

on or off, press the 

key.

4.

To exit, press the 

key.

Kidwatch Code (continued)

Summary of Contents for S5010









































































Reviews: