2
DEFINITIONS
DANGER:
Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING:
Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a situation that will or could cause minor injury or property damage.
GENERAL PRECAUTIONS
Read the Owner’s Manual before operating.
DANGER:
Do not use compressed air for breathing air applications.
Beware of high voltage: disconnect lockout/tagout electric supply before servicing.
Ground compressor per codes.
WARNING:
Beware of high-pressure air: do not bypass, modify, or remove safety/relief valves.
Beware of hot surfaces: allow unit to cool before servicing.
Do not operate with safety guards removed.
CAUTION:
To Reduce the Risk of Electric Shock or Injury, Use Indoors Only.
Never operate the compressor near flammable liquids or vapors.
Do not direct the air stream at body.
Drain tank air every day to decrease risk of bursting.
NOTE:
Per UL 1450:46.17 C-Aire recommends a maximum of 70% duty cycle for its compressors.
Upon receipt, inspect the unit for damage and missing parts. If either is apparent, make notations on the delivery receipt,
before signing the receipt. Ask the carrier how to file a claim for shipping damages.
If concealed damage is discovered (after receiving the unit), notify the carrier within 15 days of receipt, in writing.
WARNING:
Be sure lifting equipment is capable of supporting the weight of the unit.
Lift the unit by the shipping skid only.
Do not walk under or work under the unit while it is suspended.
SELECTING A LOCATION:
C-Aire compressors are to be installed and operated in a clean, dry, well-lighted, and well-ventilated area, not less than 12
inches from walls or other equipment.
Provide at least 1,000 cubic feet of fresh air per 5 hp.
Ideal operating temperatures are between 32°F and 100°F.
Avoid excessively humid areas, as moisture may form in the pump, producing sludge and causing moving parts to wear
prematurely.
SAFETY
RECEIVING AND INSPECTION
INSTALLATION
(INSTALLATION CONTINUED ON NEXT PAGE)
COMPRESSOR CAPACITY FOR DRY SYSTEMS
STANDARD DRY SYSTEM
LOW PRESSURE SYSTEMS
Model #
HP
Tank Size
40 psi
20 psi
10 psi
Light Duty
S260R-LD1-115P
1
1 gallon
260 gal.
520 gal.
1,040 gal.
Light Duty
S261R-LD1-115PD
1
NA
261 gal.
522 gal.
1,200 gal.
Standard Duty S300 SD
1.5
3 gallon
300 gal.
600 gal.
1,200 gal.
Heavy Duty
S175H-HD
1
3 gallon
208 gal.
416 gal.
832 gal.
Heavy Duty
S265H-HD
1.5
3 gallon
305 gal.
610 gal.
1,220 gal.
Heavy Duty
S325H-HD
1.5
3 gallon
372 gal.
744 gal.
1,488 gal.
Heavy Duty
S500 HD
1.5
30 gallon
559 gal.
1,118 gal.
2,236 gal.
Heavy Duty
S750 HD
3
30 gallon
870 gal.
1,740 gal.
3,480 gal.
Heavy Duty
S900 HD
5
30 gallon
925 gal.
1,850 gal.
3,700 gal.
Heavy Duty
S1300HD
5
60 gallon
1,390 gal.
2,780 gal.
5,560 gal.
Heavy Duty
S1700HD
7.5
60 gallon
2,400 gal.
4,800 gal.
9,600 gal.
Summary of Contents for S260R-LD1-115P
Page 1: ......
