BZBGEAR BG-UM44-100M-KIT, User Manual, Page: 27 / 43

- 25 / 30 -
Modify Network Setting
Modify the Mode/IP Address/Gateway/Subnet Mask/Telnet Port as required, click “Save”
to save the settings, then it will come into effect.
After modification, if the Mode is “Static”, it will switch to the corresponding IP Address;
if the Mode is “DHCP”, it will automatically search and switch to the IP Address assigned
by the router.
■ System Page
①
Panel Lock: Click “Panel Lock” to lock/unlock panel buttons. “On” indicates that panel
buttons are unavailable; “Off” indicates panel buttons are available.
② Beep: Click “Beep” to turn on/off the beep.
③ LCD: You can turn on/off the LCD and set the turn-on time (15s/30s/60s).
④ Serial Baud Rate: Click the value to set the Serial Baud Rate.
⑤ Firmware Update: Click “Browse” to select the update file, then click “Update” to complete
firmware update.
⑥
Factory Reset: You can reset the machine to factory defaults by clicking “Reset”.
⑦ Reboot: You can reboot the machine by clicking “Reboot”.
Note: After reset/reboot, it will switch to the login page.