- 8 / 30 -
No.
Name
Function Description
7
IR IN
Connect to IR receiver cable, the IR signal will emit to IR
OUT port of the Matrix.
8
IR OUT
Connect to IR blaster cable, the IR emit signal is from IR IN
port of the Matrix.
9
HDMI OUT port
HDMI output port, connect to HDMI display device such as
TV or monitor with HDMI cable.
10
RS-232 port
Connect to a PC or control system by 3-pin phoenix connector
cable to transmit command between the Matrix and HDBaseT
Receiver.
11
LAN ports
Connect Ethernet cables to these ports to provide a wired
Ethernet connection to local devices.
6. IR Remote
①
Power on or Standby: Power on the Matrix or set
it to standby mode.
②
Output 1: Press 1\2\3\4 button to select input source to
HDMI OUTPUT 1.
③
Output 2: Press 1\2\3\4 button to select input source to
HDMI OUTPUT 2.
④
Output 3: Press 1\2\3\4 button to select input source to
HDMI OUTPUT 3.
⑤
Output 4: Press 1\2\3\4 button to select input source to
HDMI OUTPUT 4.
: Select the last or next input source button.
The Matrix input and output sources can be selected by using the IR remote. There
are two ways to receive the IR remote signal.
Method 1: The IR window accepts the IR remote signal. When using the IR remote, the furthest
distance is 7 meters and the angle is ± 45°. The diagram is shown as below:
Summary of Contents for BG-UM44-100M-KIT
Page 16: ...14 30...
Page 29: ...27 30...
Page 38: ...36 30 r ip addr Get network IP address r ip addr IP 192 168 62 106...
