29
You need not to change the Subnet address. In this moment, click the
“
Save
Changes
”
button to save current status information. For example, please check the
following page.
Note:
If you have set a new IP address and click the
“
Save Changes
”
button. You
have changed the IP address, and you can continue use Web GUI function. But
next time you connect Web GUI, you need to check current the IP address on the
front panel. The IP address will recover default 192.168.1.100 when the product is
set factory reset.
Net Status button:
Clicking this button will refresh currently network configuration
information to display in Status Log.
Status Log:
Display the Net configuration information.
Clear button:
Clear the Status Log information.
Upgrade page
Summary of Contents for BZ-UHD-88M100-ARC
