BZB Gear BZ-UHD-88M100-ARC, User Manual

Page: 14 / 42

13
1. At Matrix End: The 3.5mm jack IR blaster cable is inset the IR OUTPUT
port and the 3.5mm jack IR receiver cable is inset the IR INPUT port at the
rear of the Matrix. If you want to control the HDMI input source device such
as DVD, the IR blaster head is putted the DVD aside. IR receiver head
receives the remote control signal about the HDBaseT
’
s display device.
2. At HDBaseT Receiver End: The 3.5mm jack IR blaster cable is inset
the IR OUT port and the 3.5mm jack IR receiver cable is inset the IR IN port
at the rear of the HDBaseT Receiver. If you want to control the HDMI output
display device such as TV, the IR blaster cable is putted the TV aside. IR
receiver head receives the remote control signal about the Matrix
’
s input
source device.
3. Control method: You must pay attention to an important thing, the IR signal
transmission follows the video signal between Matrix and HDBaseT. For example,
The input souce of the HDMI 1 port is switched to the HDBaseT C port display
device. If HDMI 1 input port is connected a PS4 and HDMI OUT port in HDBaseT C
receiver is connected a Sony TV. At Matrix end, the IR INPUT 1 port is controlled
the Sony TV through the Sony remote control. At HDBaseT Receiver end, IR IN port is
controlled the PS4 through the PS4 remote control. The IR blaster head should be
putted the control device aside. Please see the following IR control diagram.