BZBGEAR BG-VPTZ-HSU3
PRODUCT MANUAL
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●
To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●
The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●
Do not expose the product to rain or moisture.
●
The product has no power switch. Remove power immediately if camera is not in proper
working condition to avoid electrical shock.
●
To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●
Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●
This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●
Installation and use of this product must strictly comply with local electrical safety
standards.
●
Do not turn camera head manually. Doing so may result in mechanical damage. Camera
should only be placed on a stable horizontal surface and cannot be installed at an
angle.
●
Make sure there are no obstacles within the camera’s rotational range when installing.
Never power on before installation has been completed.
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
4
