BZBGEAR BG-VPTZ-HSU3
PRODUCT MANUAL
AV Page
The AV page is where you will find all the audio and video settings for stream encoding.
Stream Type:
Use the pull-down to select which of the 3 streams you wish to adjust. When
you select a stream, all options and settings on the page affect the selected stream.
Stream Key:
This shows the address information for your streaming output. This is not
adjustable and should be added to the end of your camera's IP address as shown below:
Default Main Stream: rtsp://192.168.1.162:554/0/0/0
Default Sub-Stream: rtsp://192.168.1.162:554/0/0/1
Frame Rate:
Specify frame rate (1-30). Frame Rate Priority prioritizes frame rate over image
quality when VBR mode is enabled.
GOP:
Frame interval (1-60). Default is 30.
Bitrate:
Video Bit Rate (1-10240). Default is 4096
Resolution:
Set streaming video resolution
Stream Mix Type:
Select Complex or Video Stream. Complex Stream includes audio.
Encode Type:
Select video encoding format.
Bitrate Type:
CBR (Coded Bit Rate), VBR (Variable Bit Rate), Fix QP (Fixed Bit Rate).
⎯
When CBR is selected stream quality, IFrame, and PFrame settings are unavailable.
⎯
When VBR is selected IFrame and PFrame settings are unavailable.
⎯
When Fix QP is selected stream quality setting is unavailable.
Audio Encode Type:
Select audio encoding format. AAC is recommended for most
streaming platforms.
Audio Input Mode:
Select Mic Level or Line Level
Audio Input Gain:
Set the audio input gain level (1-10, mute)
Audio Quality:
Select High or Low
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
26
