BZBGEAR BG-UPTZ-ND
PRODUCT MANUAL
To push a RTMP stream to a public network server, the stream camera must be on the
public network, otherwise it will fail to connect to the server.
Host address
: server address, which can be either a domain name or an IP address
Host port
: server default port number
Stream name
: live/test (live/XXX)
Username and password
: the username and password set by the server, or leave it empty
Access URL
：
rtmp://host domain name: host port/live/xxx
Or (rtmp://host IP address: host port/live/xxx)
Serial Port Communication and Control
The camera could be controlled through RS232/RS485 interface; RS232C serial parameter
are as follows: Baud rate: 2400/4800/9600/115200 bits/sec; Start bit: 1; data bits: 8; Stop
bit: 1; Parity: None.
VISCA Protocol Return Command
Ack/Completion Message
Command packet
Note
ACK
z0 41 FF
Returned when the command is accepted.
Completion
z0 51 FF
Returned when the command has been executed.
z = camera a 8
Error Messages
Command packet
Note
Syntax Error
z0 60 02 FF
Returned when the command format is different or when a
command with illegal command parameters is accepted
Command Not Executable
z0 61 41 FF
Returned when a command cannot be executed due to
current conditions. For example, when commands
controlling the focus manually are received during auto
focus.
Address:
830 National Drive #140, Sacramento, CA 95834, USA
·
Tel:
+1(888)499-9906
·
Email:
23
