13
3.2 Remote Controll
3.2.1
Keys Instruction
3.2.1 Key Description
1. Power/Standby Key
Press and hold for 3 seconds to place the camera into standby mode. Press and hold for 3 seconds a
second time and the camera will self-test again and return to the HOME position. Note: Camera will
default to preset 0 if no command is sent within 12 seconds of power on.
2. Camera Select
Select the ID of the camera you wish to control.
3. Number Key
Set or run preset 0-9
4,* # Key
Used for command modifiers
5. Focus Control Key
Auto: Activate auto focus mode.
Manual: Activate manual focus mode.
+/-: Adjust focus in manual focus mode.
6. Zoom Control Key
Zoom
＋
: Zoom In
Zoom
－
: Zoom Out
7. Set or Clear Preset key:
Set Preset: Press and hold while selecting desired number key to record a preset.
Clear Preset key: Press and hold while selecting desired number key to clear a preset.
8. Pan/Tilt Control Key
Tilt camera up
Tilt camera down
Pan camera left
Pan camera right
HOME
: Return to the middle position/ confirm on-screen menu selection.
9. BLC ON/OFF
Turn on or off remote control button backlighting.
10. MENU
Enter or exit on-screen menu/previous menu.
11. Camera IR Remote Control Address Setting
【
*
】
+
【＃】
+
【
F1
】
:Camera Address No.1
【
*
】
+
【＃】
+
【
F2
】
:Camera Address No. 2
【
*
】
+
【＃】
+
【
F3
】
:Camera Address No. 3
【
*
】
+
【＃】
+
【
F4
】
:Camera Address No. 4
3.2.2 Applications
Following initialization, the camera can receive and execute the IR commands. The indicator will flash when the camera receives
a command. Users can control the pan/tilt/zoom, settings, and run preset positions via the IR remote controller.
