22
value: real time normal (2), real time best (1), fluency normal (3), fluency good (4) and fluency best (5))
b) Recording video packing time(minute):
Set recording video packing time (default is 10, range from 1~120
minutes)
c) Recording/Snapshot file storage route
: Set local recording video/snapshot file storage route.(Default
D:\MyIPCam\)
d)
Click the
Save
button to make settings effective.
2)Audio Configuration
a)
Switch: Choose to enable the audio or not.
b) Compressing format: Set audio compressing format and the device will reboot automatically after change
(default MP3, PCM, AAC optional)
c) Sampling frequency: Set sampling frequency and the device will reboot automatically after change (default
44100,16000,32000 and 48000 optional)
d Sampling precision: Set sampling precision (default 16bits)
e) Compressing code rate: Set audio compressing code rate (default 64bits, 32,48,96,128bits optional)
f)
Click “Save” button and the settings become effective when noting “Saved successfully”
4.2.5 Video configuration
1) Video encoding
a)
Code stream:
It will call different code stream when setting different video output format. (Main stream and Secondary
stream)
b) Compressing format:
Set video compressing format and the device will reboot automatically (Main/Second code
stream default H.264, H.265 optional))
c) Video size:
set resolution, then device will restart automatically (Main stream default 1920*1080,1280*720 optional,
Secondary stream default 640 * 320, 320 * 180,1280 * 720 , 1920*1080 optional).
d) Stream Rate control:
Set rate control mode, then device will restart automatically (Primary / secondary stream default
variable bit rate, fixed rate is for option).
e) Image quality:
Set image quality(default for Primary stream is better image, secondary stream default is bad image.
Best, better, good, bad, worse, worst for optional).
f) Rate (Kb / s):
Set the video bit rate (main stream default 4096Kb / s, 64-12288Kb / s optional; secondary stream default
1024Kb / s, 64-10240Kb / s optional).
g) Frame rate (F / S):
Set the video frame rate (primary / secondary stream default 25F / S, primary stream 5-30F/S
optional, secondary stream 5-30F / S optional ).
h) Keyframe interva
l: Set the key frame interval (primary / secondary stream default 75F, primary / stream 1-300F
optional. secondary stream 1-150F optional).
i) Name of Stream:
User can revise the name of stream when obtaining RTSP or RTMP stream; main stream (default
live/av0), secondary stream (default live/av1). Note: usually remain the live and revise the parts thereafter.
j)
Click on the "Save" button to display the "Save successful" message, then set is to take effect.
2)Flow Post
a)
Switch: To turn on or off the main / secondary stream.
b)
Protocol: primary / secondary stream are both use RTMP protocol.
c)
Host Port: server port number (default 1935,0-65535 optional)
d)
Host Address: server IP addresses (default 192.168.5.11)
e)
Flow Name: choose a different stream name (live / av0, live / av1 optional).
f)
User: Set the username.
g)
Password: Set the password.
h)
Click on the "Save" button to display the "Save successful" message, then set is to take effect.
3)Video Parameters
Focus:
Focus Mode: set the focus mode (the default auto, manual optional)
Focus range: set the focus range (the default middle, the upper and lower optional)
