19
For the following steps refer to the diagram below.
Click on the bubble for “
Use the following IP address
”
In the
IP address
field enter a non-conflicting IP address on the same subnet as the camera. If there is another device with
the same IP address you will not be able to connect. In the example below we are using 192.168.5.200
In the
Subnet mask
field enter 255.255.255.0
In the
Default gateway
field type 192.168.5.1
You can leave the DNS fields blank.
Click
OK
to apply your settings.
NOTE:
When you are finished configuring the camera you will need to return to this screen and click the bubbles for
“
Obtain an IP address automatically
” and “
Obtain DNS server automatically
” to restore internet connectivity to your
computer. Also make sure to reconnect any ethernet cables you may have unplugged.
