6
access (including internet access if available) to be shared between the
Transmitter and Receiver.
Note: Does not connect this RJ45 port to any of the HDBaseT port.
Such behavior may damage this port or whole device.
11.
RS-232: Connects to any devices with RS-232 port for RS-232
commands transmission.
12.
SERVICE SEL 1/2: Reserved for manufacturer use only.
5.2
Receiver Front and Rear Panel
1.
POWER LED: System power indicator.
2.
ARC LED: ARC status indicator.
3.
ARC Button: Press the button will enable or disable the ARC function.
Enable ARC: LED ON
Disable ARC: LED OFF
4.
DC 24V: Connects 24V/1A adaptor to AC wall outlet for power supply.
5.
HDBaseT IN: Connects to HDBaseT Transmitter with a Cat5e/6/7 cable.
6.
IR IN: Connects to a Wideband IR RX cable.
7.
IR OUT: Connects to a Wideband IR TX cable.
8.
OPTICAL IN: Connects to audio source device such as DVD or Blu-ray
player for sending audio signal to Transmitter.
9.
HDMI OUT: Connects to a HDMI display device.
