5
5. Operation Controls and Functions
5.1
Transmitter Front and Rear Panel
1.
POWER LED: System power indicator.
2.
ARC LED: ARC status indicator.
3.
ARC Button: Press the button will enable or disable the ARC function.
Enable ARC: LED ON
Disable ARC: LED OFF
ARC function: If you need use ARC, your HDTV must support this
function, when you open the ARC function, the transmitter optical out
port will output the HDTV current display content audio signal,
otherwise the transmitter optical out port signal comes from Receiver
’
s
Optical In.
4.
DC 24V: Connects 24V/1A adaptor to AC wall outlet for power supply.
5.
HDBaseT OUT: Connects to HDBaseT Receiver with a Cat5e/6/7
cable.
6.
IR IN: Connects to a Wideband IR RX cable.
7.
IR OUT: Connects to a Wideband IR TX cable.
8.
OPTICAL OUT: Connects to speaker with coaxial input for audio signal
output from Receiver
’
s Optical In or ARC.
9.
HDMI IN: Connects to HDMI source device.
10.
LAN: Connects to an active network for LAN sharing of a total
transmission rate up to 100Mbps. Or when a compatible LAN equipped
Transmitter is connected to an active network, this allows the network
