ByoPlanet MS-700 Operator'S Manual Download Page 3

SAFETY NOTICES

WARNINGS

WARNINGS

WARNINGS

WARNINGS

This manual contains information that is important for you 
to know and understand before operating the ByoPlanet

®

 

MS-700™ Electrostatic Sprayer. This information relates to 
protecting your safety and ensures product reliability and 
performance. It is the owner’s responsibility to ensure that  
all who operate this equipment read this manual.

Warnings

To help you recognize this information we use the warning 
symbols below. Please read the manual carefully, and pay 
special attention to the symbols and warning labels. Warning 
labels indicate a potentially hazardous situation which, if not 
avoided, could result in death or serious injury.

PLASTIC PARTS CLEANING SOLVENT HAZARD 

Many solvents can degrade plastic parts and cause them  
to fail, which can lead to serious injury or property  
damage. In order to help prevent against degradation:

FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD 

Flammable fumes, such as solvent and paint fumes, in  
work areas can ignite or explode. To help prevent fire,  
explosion  and electric shock:

• 

Use only compatible  
water-based solvents to clean 
plastic structural pressure  
containing parts.

• 

See technical data in this and 
all other equipment instruction 
manuals. Read fluid and solvent 
manufacturer’s Safety Data 
Sheets (SDS) and recommenda-
tions prior to use.

• 

Electrostatic equipment must be 
used only by trained, qualified 
personnel who understand the 
requirements of this manual.

• 

Stop operation immediately if 
static sparking occurs or you feel 
shock. Do not use equipment 
until you identify and correct the 
problem.

• 

Use and clean equipment only  
in well-ventilated area.

• 

Never spray a flammable  
chemical (with a flash point  
less than 140°F [60°C]).

• 

Do not plug or unplug power 
cords or turn lights on or off when 
flammable fumes are present.

• 

Keep spray area free of debris, 
including solvents, rags,  
gasoline or any flammable  
chemicals.

• 

Keep a working fire extinguisher 
in the work area.

ENGLISH  |  3

BYOPLANET.COM

• 

Read and fully understand the ByoPlanet

®

 MS-700™ 

Electrostatic Sprayer Operator’s Manual prior to using 
the electrostatic sprayer.

• 

Read and fully understand ByoPlanet-approved  
product labels prior to using any liquid product with 
the ByoPlanet

®

 MS-700™ Electrostatic Sprayer.

• 

ByoPlanet

®

 MS-700™ Electrostatic Sprayers are for 

both indoor and outdoor commercial use. Bystanders 
and pets should not be in the area during application.

• 

ByoPlanet

®

 MS-700™ Electrostatic Sprayers should 

not be operated below 55°F (12.5°C).

• 

ByoPlanet

®

 MS-700™ Electrostatic Sprayers should 

never be used in any area containing volatile  
chemicals, nor should they be used in hazardous  
environments or any area containing volatile or  
explosive levels of gas, vapor or airborne particles.

• 

ByoPlanet

®

 MS-700™ Electrostatic Sprayers should 

never be used by untrained personnel.

• 

Check hoses, tubes  
and couplings daily.  
Replace worn or  
damaged parts  
immediately.

PRESSURIZED EQUIPMENT HAZARD 

Fluid from equipment that leaks or ruptures from a  
component can splash in the eyes or on skin, causing  
serious injury. In order to help prevent a leak or rupture:

Summary of Contents for MS-700













Reviews: