Mods
1. The rotary switch shown for the inductor mod is a 3 pole 3 position. Position one
would be inductor 1. Postion 2 would be inductor 2. Position 3 would be both in series.
2. The inductor highlighted in red would show how you would add a fasel inductor.
3. The Range Mod is shown with a 1 Pole 4 position rotary switch, but more positions
could be added or reduced.
4. The DPDT toggle switch is for bypassing the output buffer.
5. 16mm potentiometers do fit along the sides of the wah enclosure, but carefully make
ZERO OHM resistor on the left if you are doing the dual inductor mod.
circuit board if you are doing the buffer bypass mod. Do not include the
Do not include the two ZERO OHM resistors to the right side of the
sure everything will fit before you drill.
