ByDzyne tuw, User Manual

Page: 12 / 32

1. Pair The App To Your Smartwatch:
Open App > home dashboard > tap “Click to connect
smartwatch” (right hand side of pink bar)*
You will be prompted to turn on your GPS location as well.
Click “Confirm”
2. Activate The T
!
w tm Smartwatch Connection:
* The smartwatch can store the data up to 7 days without being paired to the phone.
*
Your phone must be set to receive notifications (often can be found under phone
Settings
>
Apps
> t ! w
Smartwatch
>
Permissions
>
Location)
Syncing your App to the Cloud
After you connect the smartwatch and the App, a prompt will ask you to sync
the app to the cloud so that your data can be stored. If you are not logged into
your account, the App data will be stored locally on your
mobile phone and once you log back into your account,
the data will then be uploaded to the cloud.
To Disable Syncing:
Open App > tap “Settings” icon > tap “t
!
w" under My Smartwatch Settings” >
tap the “Sync to cloud” button
12
Pairing the App to Your
Smartwatch
Tap on “Connect” beside your t
!
w TM device.
To confirm which smartwatch is yours, press the
screen on the smartwatch for about 4 seconds.
The MAC number is your unique
t
!
w TM smartwatch ID.
You must now pair/connect your Smartwatch to the App. Pairing your mobile
device will make sure the App and smartwatch can communicate with one
another, syncing data back and forth using Bluetooth. Make sure your phone’s
Bluetooth connection is switched on at all times to enable syncing.
*
Some mobile phones will require that the Location is turned on in order
for the smartwatch to be detected via the App.
3. To Disconnect The Smartwatch:
Open App > tap “Settings” icon > tap “My Smartwatch Settings” > tap off
“Pair device” button