ByDzyne tuw, User Manual

Page: 28 / 32

Answer Call / Mute / Reject Call
Being connected to your phone via Bluetooth will allow you to utilize this function.
The smartwatch vibrates when there is an incoming call and will display the
caller’s number. If the phone number is in your contact list, the caller’s name will
also appear. You are also able to mute or reject the incoming call.
To Turn On Answer Call In App:
Open App > tap “Settings” icon > tap “message notification” arrow > tap “Phone
Call” button
To Mute A Call On Smartwatch:
When there is an incoming call, the smartwatch will vibrate. Touch
the green microphone icon at the bottom right to silence the
call and stop the smartwatch from vibrating.
To Reject A Call On Smartwatch:
When there is an incoming call, the smartwatch will vibrate.
Touch the red icon at the bottom left to reject the call. The
smartwatch will indicate the call has been disconnected.
Wear detection
The Wear Detection feature is to make sure you are wearing your t
!
w TM
Smartwatch in order to perform functions such as heart rate measurements. If
the smartwatch is on your arm, a measurement will be taken. If the smartwatch
detects it is not on your arm, the green sensor lights will flash and then the
screen will switch into standby mode, thus any measurements will not be taken.
To Turn On Wear Detection:
Open App > tap “Settings” icon > tap “My Smartwatch Settings” > tap “Switch
settings” arrow > tap “Wear detection” button
28