background image

ECB70

/

80 

21

OM-ECB70

/

802019001-EN

OPERATOR MANUAL

20

OM-ECB70

/

802019001-EN

Dash Panel

Dash Panel Appearance

No.

Name

No.

Name

No.

Name

1

Motor Overheating Warning Indicator

7

Overload Warning Indicator

13

Voltage Message

2

Battery Error Warning Indicator

8

Checking and Diagnosis Indicator

14

Speed Mode

3

Parking Indicator

9

Speed Mode On Indicator

15

Gear

4

Left Turning Light

10

Enter

16

Total Hours

5

Warning Message

11

Functions

17

Odometer

6

Right Turning Light

12

Speed Mode Control Switch

18

Battery Message

Dash Panel Operating

1.Speed mode adjustment

Press the Speed Mode Control Switch to change the speed setting which including high, low

and OFF (without speed mode control).

         Press the Speed Mode Control Switch for 2 seconds and the indicator will be lit. Pressing the 

Speed Mode Control Switch will allow you to choose from the 3 speed settings including high, 

middle, low and OFF (without speed mode control).

No.

Name

No.

Name

No.

Name

1

Speed  Mode  Contr ol 

Switch

2

S p e e d  M o d e  O N 

Indicator

3

Speed Mode

2.Working Indicator and Messages

During normal work, the message is the current speed.

After the forklift is switched on, if the seat is vacant, warning message of "Please return to 

the seat" will be displayed.

When the battery charge is low and the buzzer sounds, warning message of "Charge the 

battery at once" will be displayed.

3.Gear

           Gear letter of the forklift is shown on the dash panel, which may be F (forward), N (neutral), or 

R (reverse).

4.Dash panel setting

           Press the middle button at the right to enter into the Setting.

        The operator can change the setting on the time, unit, working hours, background light, 

language and factory setting.

           Functions of the 3 buttons:

(1)Upper button: Moving the cursor up. Increasing the value of digit and number.

(2)Middle button: Pressing this button to enter the Setting window. Select and enter the

 sub-menu. Select and confirm the digit and number.

(3)Lower button: Moving the cursor down. Decreasing the value of digit and number.

km/h

XXX

565km

XXXXX     253h

XXXXXX     80V

XXXX

XX

73%

1

2

3

4

5

6

8

7

9

10

11

12

14

15

16

17

18

13

XXXX

XX

1

2

3

km/h

Summary of Contents for ECB70
























Reviews: