12 Cleaning instructions
Ingress protection marking (IP)
Model-approved IP code:
IP 41
IP code description
Solid particle protection
IP
4
X
>1 mm
Most wires, slender screws, large ants etc.
Liquid ingress protection
(with batteries)
IP X
1
Dripping water Dripping water (vertically falling drops)
shall have no harmful effect on the spe-
cimen when mounted in an upright position
onto a turntable and rotated at 1 RPM.
Special instructions/Precautions
l
Always wear the correct safety equipment while cleaning
l
Lower the lifting tool, so that you don't risk a head injury when cleaning near the floor.
l
The battery charger must be disconnected from the main during cleaning.
Detergent application
l
Use a standard pH neutral
cleaning detergent.
l
Do not use acid, alkaline or harsh chem-
ical products, these might weaken the
drive belt and other sensitive com-
ponents or leave marks on the surfaces.
Work process
l
The outer surfaces can be
cleaned using a wet brush
or a damp cloth.
l
Do not use liquids to clean the e-
Bikelifter as this may have adverse
effect on the electrical components.
Key inspection points
l
Check the proper function of all components before the e-bike lifter is put back into oper-
ation after cleaning.
15
