14
10 Maintenance and Inspection
All Hovmand products are designed for longevity and minimum maintenance, however regular safety
checks and procedures are required.
Hovmand strongly recommends the following checks to to be carried out on a daily basis and before using
the e-Bikelifter. Ensure that the lift is functioning as intended. If in doubt, do not use.
l
The e-Bikelifter must be free of dirt or debris which could affect safe operation
l
Ensure all warning labels are present, without damage and are readable.
l
Ensure no sign of wear, unusual noises or visual defects.
l
Ensure bolts, nuts and rivets are tight.
l
Ensure the e-Bikelifter moves freely on its transport wheels.
l
Ensure control unit is in working order.
The yearly maintenance must be performed by a qualified technician.
The critical components listed below, must be replaced with the intervals stated, to make sure that the e-
Bikelifter is in safe, operational condition.
Critical components:
For instructions on replacing critical components, contact the manufacturer, Hovmand Company, if neces-
sary.
Timing belt
l
Replace when / if any of the below points occur:
l
Any sign of wear, visual cracks, or miscolour.
l
Under normal use (Use < 20 lifts per day, in average over a year), replace after 8 years.
l
Under intensive use (Use > 20 lifts per day, in average over a year), replace after 4 years.
One way bearing
l
Replace when / if any of the below points occur:
l
Any sign of wear, unusual noises or visual defects.
l
Under normal use (Use < 20 lifts per day in average over a year), replace after 8 years.
l
Under intensive use (Use > 20 lifts per day, in average over a year), replace after 4 years.
11 Disposal
When disposing the e-Bikelifter, make sure to sort the different materials by category, metal,
electronic waste, batteries etc.. Make sure to follow the local environmental legislations, and
hand over the materials to the local recycling station.
l
Note: The batteries contain lead and must be disposed accordingly!
