8
E
Connection Terminals
Connect terminals marked L (Live), N (Neutral) and E (Earth) on
the right of the terminal box to the fused switched spur for the
mains power supply (using the flying lead supplied with the panel
or similar)
Connect flying lead from Powermag coil assembly to the terminals
marked:
+ (use brown cable)
- (use blue cable)
E (use green / yellow cable)
–
NOTE: a spare Earth terminal is available
on the left of the terminal block
Connect thermistor cable to 2 central terminals marked TEMP (or
Thermistor). The thermistor circuit is a loop so the terminals can be
connected either way round
Terminals 7,8 and 9 are for BMS and fault monitoring systems only
The diagram below shows the monitoring relay in the power OFF state. When power
is ON the terminals 7 and 8 will close circuit
