6
Key to LCD Display
Running Temperature: Temperature
reading from the thermistor on the
outlet pipework
Coil Current: Operating current of
electromagnet
Hours Run: Total hours of coil
operation since installation
Set Temperature: Maximum
temperature setting for thermistor
circuit
Coil Status: Current status of the coil
- Coil Active when operational
- Coil Inactive when thermistor set
temperature is achieved
Activity LED Display: Visual display of
coil activity
- LED will run left to right when active
- LED will halt when inactive
- LED will illuminate fully when a fault
is present
Isolation
Valve
Isolation
Valve
LED
Display
Activity
LED
Display
Isolation
Switch
Powermag
230V 50Hz Supply
Thermistor
Attach to the pipe surface downstream of
the device using cable tie or similar
Use for cold water only
Thermistor is a safety and efficiency device
for cold water systems and will render the
coil inactive when water stops flowing by
detecting an increase in the standing water
temperature in the pipework
Powermag coil flying lead length
supplied: 4.5m (approx.)
Thermistor lead length supplied:
2.5m (approx.)
