PRODUCT INFORMATION
BULLETIN
238 Pillow Street
Butler, PA 16001
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
AIR-EAGLE
®
SR PLUS
2.4 GHz RF Repeater
MODEL 36-4500-DC
DESCRIPTION
The A
IR
-E
AGLE
SR PLUS RF R
EPEATER IS
designed to retransmit an
RF signal from any Air-Eagle SR or SR PLUS Transmitter. When
placed in an area where the signal is weak, this unit will then re-
transmit at full strength facilitating greater distances and allowing the
RF signal to reach around corners, through tunnels, over hills and
through valleys.
APPROVALS
United States (FCC)
OUR-XBEEPRO
Canada (IC)
4214A-XBEEPRO
Europe (CE)
ETSI
INSTALLATION
DISCONNECT DC Power from all equipment before installation.
1.
Mount the A
IR
-E
AGLE
SR PLUS R
EPEATER
in a convenient location.
2.
Install antenna. The unit has an antenna connector located on the
right side on the enclosure. Attach the supplied portable antenna to
this connector.
3.
Connect DC power and control to the proper terminals in your control
circuit.
TERMINAL STRIP WIRING
1
Not Used
7
Not Used
13
(-) 9-36VDC INPUT
2
Not Used
8
Not Used
14
(+) 9-36VDC INPUT
3
Not Used
9
Not Used
4
Not Used
10
Not Used
5
Not Used
11
Not Used
6
Not Used
12
Not Used
Dimensions (with mounting plate) 6.3” L x 4.8” W x 2.3” H
CONTROLS AND INDICATORS
TER1
D
6
R
1
1
D
7
D
3
R
3
VR1
D
2
MOV1
F
1
BP1
BP2
MOV2
REL1
MOV3
MOV4
+
C3
FET3
+
+
INPUT
OUT
-
-
PWR1
D
1
R
1
0
C1
C2
FET2
RF1
R
9
D
4
R
8
R
4
R
5
R
2
SEL1
D
5
FET1
R
6
FET4
LED1
R
7
IC1
T1
R
1
LED4
LED3
REL4
REL3
LED2
REL2
3.3V
N/O C N/C
- +
|
|
1
2
|
|
|
|
|
|
N/O C N/C
4
3
AC/DC INPUT
N/O C N/C
N/O C N/C
.
RX LED
Yellow LED illuminates as remote signals are
being received by the repeater
POWER LED
Green LED is illuminated while power is applied
to the repeater
TX LED
Red LED illuminates as remote signals are
being re-transmitted by the repeater
RF1
RF module that receives data from the remote
transmitter
SEL1 – 4
Not used on this model
SEL5 – 6
Used to set frequency
