GasAlertMicroClip
Maintenance
17
Maintenance
To maintain the detector in good operating condition, perform
the following basic maintenance as required.
• Calibrate, bump test, and inspect the detector on a regular
schedule.
• Maintain an operations log of all maintenance, bump tests,
calibrations, and alarm events.
• Clean the exterior with a soft damp cloth. Do not use
solvents, soaps, or polishes.
Replacing a Sensor or Sensor Filter
a
Warning
To avoid personal injury, use only sensors specifically
designed for the detector.
Use proper ESD handling practices.
a
Caution
Ensure hands are clean or wear gloves before handling
components.
To replace a sensor or sensor filter, refer to the following
illustration, table, and procedures.
1
11
10
3
2
4
6
5
8
9
7
www.
GlobalTestSupply
.com
Find Quality Products Online at: