background image

3

Safety Information

WARNING: Read and understand the complete operation manual before 

assembling or using this product! Failure to comprehend and comply with 

warnings, cautions and instructions for assembly and operation could result in 

serious injury or death.

DO NOT permit children to operate this equipment at any time� DO NOT permit 

others that have not read and understood the complete operation manual to operate 

this equipment� Operation of power equipment can be dangerous� It is the sole 

responsibility of the operator to understand the assembly and safe operation of this 

product�

Call us on 1300 454 585 if you have any questions or concerns about the safe 

operation of this equipment�

INTENDED USE: Do Not Use the log splitter for any purpose other than splitting

wood, for which it was designed. Any other use is unauthorized and

may result in serious injury or death.

PERSONAL PROTECTIVE EQUIPMENT

When operating this log splitter it is essential that you wear safety 

gear including goggles or safety glasses, steel toed shoes and tight 

fitting gloves (no loose cuffs or draw strings). Always wear ear plugs 

or sound deafening headphones to protect against hearing loss when 

operating this log splitter�

DO NOT wear loose clothing or jewelry that can be caught by moving parts of the log 

splitter� Keep clothing and hair away from all moving parts when operating this log 

splitter�

WARNING

CAUTION

DANGER

Summary of Contents for BWMLS30H





























Reviews: