11
1 - Unpacking the Container
Step 1.1
Remove plastic wrap on crate.
Step 1.2
Remove restraining bolts from
the beam. Use a 13mm wrench /
socket wrench to remove the two hex
bolts that are securing the beam to
the crate bottom (right). Please note
that the two hex bolts are located
diagonally opposed to each other�
Step 1.3
Remove beam and cylinder
assembly from crate with
assistance of a helper. Lift beam
and cylinder assembly to its vertical
position standing upright on the
beam’s footplate.
Step 1.4
Use a 13mm wrench / socket wrench
to remove the single hex bolt that is
securing the tank assembly to the
crate bottom (right).
BEAM ASSEMBLY IS
BOLTED DOWN IN TWO
LOCATIONS� REMOVE
BOLTS TO UNPACK
BEAM ASSEMBLY�
REMOVE BOLT�
USE CAUTION
WHEN LIFTING -
HEAVY WEIGHT!
Summary of Contents for BWMLS30H
Page 27: ...27 Notes...