17
6 - Beam and Tank Assembly
No. Part No.
Description
Qty.
1
BWMLS136 Hitch pin 5/8” x 6-1/4”
1
No. Part No.
Description
Qty.
2
BWMLS137 R-clip, 1/8”. Fits 1/2” to 3/4”
1
Step 6.1
Rotate the jack stand attached to the side of the tongue assembly downwards into position by
releasing the pin and then securing the release pin�
Step 6.3
Slowly back the assembled unit up to the beam and cylinder assembly� Align the tongue bracket of
the assembled unit to the pivot bracket of the beam assembly�
2
1
Step 6.2
Remove the retaining clip
(
2
)
and hitch pin
(
1
)
from the assembled unit (below).
Step 6.4
Once the brackets are aligned, install the hitch pin
(
1
)
through the brackets then install the retaining
clip
(
2
)
into the hitch pin�
Summary of Contents for BWMLS30H
Page 27: ...27 Notes...
