BroadcastVision Entertainment Technical Support
Telephone: 1(888) 330-4283 ext.3
Email: [email protected]
e.
No Continuity between CAB and IR emitter
– In some circumstances
utilizing the
“Far” set top box scenario, the CAT5/6 cable between the set
top box and the CAB may not provide full continuity through wall plates
etc. It may be helpful to re-locate the STB at the base of the cardio and
re-test. Or, it may be helpful to temporarily run an alternate CAT5/6 cable
from the CAB to the set top box then re-test.
f.
CAB not programed for the correct set top box
- Your CAB is
defaulted for Broadcastvision
’s popular “Unicode” setting which provides
control of the most popular cable and IPTV set top boxes including, but
not limited to:
• AT&T Uverse, Brighthouse, Comcast, Time W arner, and Verizon
The CAB can be quickly configured on site to operate other popular set top boxes by
flipping dip switches inside the CAB enclosure as pictured below. CAB operates with
many other set top boxes not included in the list below. Please call BroadcastVision
support at 8883304283 x3 to determine the dip switch settings for your cable, satellite,
or IPTV provider.
1 2 3 4 5 = Dip Switch settings for the following set top boxes:
0 0 0 1 1 - CAB will output commands for Amino set top boxes
1 1 1 0 1 - CAB will output commands for Enseo set top boxes
0 0 1 0 1 - CAB will output commands for LG set top boxes
0 1 0 0 1 - CAB will output commands for Rogers set top boxes
1 0 0 0 1 - CAB will output commands for Cox set top boxes
0 1 0 1 0 - CAB will output commands for Charter set top boxes
1 0 0 1 0 - CAB will output commands for Unicode-Satellite for DirecTV and Dish set
top boxes
