Buyers Snowdogg EX75II, Installation Manual

Page: 5 / 16

5 3036332_A
7
11a
11b
9
6
8
Bill of Materials
ITEM QTY. PART NO. DESCRIPTION
1 1 16013002 VXFII Lift Frame Assembly
2 1 16111634 Upper Lift Frame
3 1 16160700 Light Kit
3A 1 16160710 Light, DS
3B 1 16160720 Light, DS
4 1 16101106 Lift Frame Hardware Kit
4A 4 – Carriage Bolt, 1/2-13x1.50
4B 4 – Washer, 1/2"
4C 4 – Nut, 1/2-13 Center Lock
5 1 16101108 Shock Mount Kit, Light (x4)
6 1 16122100 Blade Guide Kit (x2)
7 2 16102142 Clevis Pin Kit
8 1 16101170 Hinge Pin Kit
9 1 16113260 Center Deflector Cap
11
1 16020724 VXF85II Moldboard w/Deflectors
1 16020734 VXF95II Moldboard w/Deflectors
Fig. 5
VXFII Moldboard/Lift Frame Assembly
1.
Assemble the V-plow MOLDBOARD WINGS (11a
and 11b) to the LIFT FRAME (1) as shown in Fig 5
using the HINGE PIN KIT (8). They can be done easi-
est by sliding the lift frame forward on its shipping pal-
let as shown in FIGURE 4. Tap the hinge pin (8) down
adjusting the wing positions as you go to allow for
complete assembly.
2. Attach both angle cylinders on the LIFT FRAME to
the MOLDBOARD as shown using the 7/8” clevis pins
and hardware (7). The wings should move freely to
allow attachment to the cylinder rods.
3. Install the DEFLECTOR CAP (9) with hardware as
shown
4. The trip spring mechanisms have been pre-
installed and tensioned. They may need to be straight-
ened as they may have shifted during shipping and
handling.
5. Install the snow deflectors by loosening the fas-
teners on the top strip of each wing moldboard. The
deflector fits between the black retainer strip and the
stainless moldboard. Only the OUTER TWO fasteners
need to be completely removed.
6. Install the blade guides (6) as shown.
7. Grease the 7 hinge pin tubes using a needle style
grease gun tip. Do NOT install grease fittings in
these holes as they will be damaged by normal plow
movement.
4.75
4.00
LIFT FRAME
SHIPPING PALLET
8
Fig. 6