![background image](http://html1.mh-extra.com/html/buyers/8883000/8883000_manual_2836068007.webp)
7
Before drilling please check that no cable or wiring is on
the other side of the wall. Please clamp all wires securely
to reduce the possibility of them being damaged
while vehicle is in use. Keep all cables away from hot
or moving parts and components causing electrical
interference.
We recommend doing a bench test before installation to
insure that all components are working properly (pg 13).
Step 1:
Choose the monitor and camera locations.
Step 2:
Install all cables in vehicle, when necessary a
0.8" (20mm) hole should be drilled for passing camera
cable through vehicles walls. Install split grommets
where applicable.
Step 3:
Once all cables and wiring have been properly
routed, perform a system function test by temporarily
connecting the system. If the system seems to not be
operating properly see troubleshooting (pg 17).
Before Beginning Installation
Summary of Contents for 8883000
Page 16: ...16 Positioning...