Installation Guide
10
• Audio: There is audio on channels 2 and 3. On CH3 the
trigger wire must be energized (+12VDC) to activate the
audio. On CH2 the audio is always on.
• Grid-lines: The grid-lines are also carried through the CH3
wire. To use the grid-lines for reversing, connect the CH3
wire to a reverse power. Grid lines can be deactivated in
the menu. Menu > PARKSET > Toggle ON or Toggle OFF
• There is a built-in voltage regulator for our systems which
can handle 10-30 Volts DC.
Note: The camera and monitor can always be activated by manually
pushing the power button on monitor. This is in addition to utilizing the
positive triggers.
Note: If connecting power directly to battery, the camera is always
ON and therefore can drain battery. Therefore it is recommended to
connect power to an ignition switched accessory power source.
Summary of Contents for 8883000
Page 16: ...16 Positioning...
