EN 9
Pairing earphones with each other
– The
earphones are already paired from the factory,
so no further pairing is required. However, if
the earphones cannot be paired automatically
(i.e. the light blue flashes alternately on both
earphones), tap the left and right earphone
twice at the same time.
When the TWS are successfully paired, the “L”
earphone indicator will slowly flash blue-white,
the “R” earphone indicator will slowly flash
white. A mobile, floating connection is also
available. (If pairing fails in TWS mode, return
the earphones to the rechargeable box and
repeat the above instructions.)
Caution:
Prevent hearing damage and always
keep the volume level of your device to
a minimum before connecting BT earphones
to your mobile device. Keep the touch control
pad clean and avoid contact with other objects
or body parts, such as hair.
Note
: If the BT earphones are not paired with
any device, they will turn off if they are idle for
a long time. Therefore, put them in the case.
Putting into operation
