Butts of Bawtry TCS0022, User Instructions & Parts List

Page: 4 / 22

2
6. Workplace requirements:
Choose workplace in compliance with safety regulations. Connect power supply and air source according to
manual, workplace must have good air condition; in order to make the machine run well,
its workplace requires at least clear space from each wall shown as Fig 2. If installing it
outdoor, it must be protected by roof against rain and sunshine.
Warning: the machine with motor must not be operated in explosive
atmosphere.
7. Product diagram
Operation and function label:
8. Assembly procedure:
1. Prepare the tools and unscrew the nuts at the bottom, position the machine and calibrate it with the
horizontal rule. Mount the machine with the screws. Make sure the system is equipped with a good grounding
circuit. And have operations for skid prevention.
2. Unscrew the nut A on the body B as shown in Fig 4. Lift the column C, mount it on the body using the nut A
through the bolt located on the body B. If the column becomes loose, screw them immediately. Otherwise damage to
the tyre may happen.
9. Electric& Pneumatic link up
1) Depress the Jaw Clamping pedal (G, Fig 3) to ensure that the jaws on the turntable do not open unexpectedly
to avoid injury caused by the accident.
A Adjustable handle H Bead breaker pedal
B Swing arm I Lift lever
C Vertical arm J Rubber buffer
D Jaw K Bead breaker arm
E Turntable L Mounting head
F Reverse pedal M Column
G Jaw Clamping pedal N Locking handle
Fig 3
Air blast pedal Turntable reverse pedal
Jaw clamping pedal
Bead breaker pedal
Fig2