INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 15 of 43
AFTER THE ASSEMBLY, CHECK
THE CORRECT POSITION OF THE
TOOLS. LOCK THE RIM ON THE
MANDREL CENTRE. WITH THE
LOWER BEAD BREAKER ARM,
CHECK THAT THE DISTANCE BE-
TWEEN THE ROLL AND THE RIM
EDGES (UPPER AND LOWER) IS
ALMOST THE SAME. REPEAT ALL
THE PROCEDURES STARTING
FROM POINT 1 IF THE DISTANCE
IS NOT THE SAME.
Fig. 12
10.2 Electrical checks
BEFORE STARTING UP THE TYRE-
CHANGER, BE SURE TO BECOME
FAMILIAR WITH THE LOCATION
AND OPERATION OF ALL CON-
TROLS AND CHECK THEIR PROP-
ER OPERATION (SEE PAR. “CON-
TROLS”).
CARRY OUT A DAILY CHECK OF
MAINTAINED-TYPE CONTROLS
CORRECT FUNCTIONING, BEFORE
STARTING MACHINE OPERATION.
11.0 CONTROLS
E
F
C
D
G
B
I
M
H
L
A
Fig. 13
11.1 Control device (see Fig. 13)
The control device consists of a panel with integrated
keys and push buttons.
• The selector
“A”
allows the machine working selec-
tion: automatic or manual.
- Automatic: it allows to enable the functioning of
the feeler pins placed on the bead breaking rolls.
- Manual: it allows to carry out all the bead breaking
operations without the checking of the feeler pins.
•
The inflation pressure gauge
“I”
for the pressure
reading into the tyre.
•
The inflation push button
“E”
, if pushed it allows to
deflate the tyre at the required pressure.
•
The push button
“B”
has one mechanically hold
position and once pushed it controls the operation
of the upper bead breaking roll cam for its insertion
into the rim in “Manual” mode. In the “Automatic”
model the push button is disabled.
•
The push button
“G”
has one mechanically hold
position and once pushed it controls the operation
of the lower bead breaking roll cam for its insertion
into the rim in “Manual” mode. In the “Automatic”
model the push button is disabled.
•
Arms automatic return from the working position.
In AUTO mode, pushing at the same time the
“G”
and
“B”
keys, the tools arms automatically return into
the limit switch position. To stop the automatism, to
push the keys to control the arms vertical translation.
7104-M009-2_B
AIKIDO.4 - AIKIDO.4FI
