POS User’s Manual(V1.0)
10
2. HDD LED
HDD LED shows the activity of a hard disk drive. Avoid turning the power off while HDD LED is lit.
3. Power LED
The LED is lit when the system is power on.
USB PORTS
There are in total 6 USB ports for external connection: 2 at right side of the main unit; 4 in rear I/O
area; All of them comply with USB 2.0 standard.
CUSTOMER DISPLAY
Please follow the instructions on the manual that comes along with the customer display when it is
installed.
DISPLAY ISSUES
Main LCD Display
For best viewing result please set your display resolution at 1024 x 768 with high color for “12” &
“15” type.
VGA Port
The VGA port in this terminal supports top mount 2nd display. To support the +12V DC power to the
2nd display monitor, have a qualified technician to set a software setting to supply the required power
through the internal BIOS setting according to BUSIN technical information.
Do not connect other
monitor to this port before the power in this port is disabled.
SERIAL PORTS
–
COM1/2/3
This terminal features 3 COM ports. COM2/3 ports are standard DB9 connector as status at delivery.
COM1 is RJ11 serial port,it is configured to 5 V DC output.
PARALLEL PORT
For this terminal, the parallel port with DB25 female connector is mandatory.It should be connected to
the LPT port on the rear I/O area.
TOUCH PANEL
When the touch driver is properly installed, this touch panel works exactly like a standard mouse for
each interface. This device uses 10 points capacitance touch screen.
