![background image](http://html.mh-extra.com/html/bushranger/x-16/x-16_operators-manual_2835605018.webp)
18/24
BUSHRANGER
TM
X-16
IMMEDIATELY AFTER
emptying the container, you must keep it with the opening upside
down over the sprayer tank opening or over the bucket that you are using to prepare the
chemical mixture for at least 30 seconds, until no residue is left in the container, when the
drops are falling in long intervals.
1
Next, hold the container in the upright position and fill it with water up to ¼.
For example: in a 20-litre container, put 5 litres of water.
2
Fit the container cap and tighten it
enough to avoid leakage during the agitation.
3
Agitate the container strongly in all ways
(horizontal and vertical), during approximately 30
seconds to remove the residues that are stuck to
the container internal walls.
4
Take the container cap off and carefully pour the
rinse water into the spray tank.
5
Keep holding the container over the spray tank
opening for approximately 30 seconds to the
last drop.
6
REPEAT
this operation twice more. This way, you complete the
TRIPLE WASH.
7
Do not pierce the bottom with a pointed instrument as this will damage labels
for identification.
X-16 Backpack Sprayer
Summary of Contents for X-16
Page 1: ...COMMERCIAL SERIES OPERATORS MANUAL ...
Page 2: ...2 24 BUSHRANGERTM X 16 X 16 Backpack Sprayer X 16 Backpack Sprayer ...
Page 21: ...21 24 BUSHRANGERTM X 16 COMMERCIAL SERIES Nº CODE DESCRIPTION QTY Nº CODE DESCRIPTION QTY ...
Page 23: ...23 24 BUSHRANGERTM X 16 NOTES COMMERCIAL SERIES ...