＿
12
＿
Snap the Hook into the ring on the shaft assembly. To detach the Strap quickly from the multi-cutter, pull
upward on the Red Band.
Attaching Shoulder Strap
WARNING
POTENTIAL HAZARD
・
Without the Shoulder Strap Installed on the multi-cutter, the blade can produce side thrust which
can expose the operator and bystanders to blade contact.
WHAT CAN HAPPEN
・
Contact with Brushcutter blade can cause severe personal injury.
HOW TO AVOID THE HAZARD
・
Never operate the Multi-cutter without installing and using the Shoulder.
Connecting the Tool Attachment to the Power Unit
First, loosen the clamping knob so shaft assembly of the
tool attachment can be inserted into the tube coupler. Pull
the detent knob outward and gently rotate shaft assembly
of the tool attachment back and forth while inserting to be
sure the driveshafts completely in place. The spring loaded
detent knob will snap into place when the shaft assembly
of the tool attachment is correctly positioned. Tighten the
clamping knob. When changing the tool attachment be
careful not to over loosen the clamping knob to prevent it
from falling.
Loose
Clamping Knob
Tube
Coupler
Detent Knob
Shaft Assembly
of Tool Attachment
Red Band
Shoulder Strap
Hook
Ring
Pull
