background image

7.

  Be sure to keep this manual handy so that you 

may refer to it later whenever any questions arise.

8.

  Always be sure to include this

 

 

manual when selling, lending, or

 

 

otherwise transferring the ownership  

 

 

of this product.

9.  

Never allow children or anyone unable to fully 

understand the directions given in this manual to  

use this product.

WORKING GEAR AND CLOTHING

 

a.

  When using the product, you should wear 

proper clothing and protective equipment as 

follows.

WORK CLOTHES

1. 

   Helmet.

2. 

 

 

Protection goggles or face protector.

3. 

 

 

Thick work gloves.

4. 

 

 

Non-slip-sole work boots. 

5.  

 

Ear protectors.

EQUIPMENT YOU SHOULD CARRY 

WITH YOU

1. 

 

 

Attached tools and files.

2.

 

 

Properly reserved fuel and chain oil.

3. 

 

Things to notify your working area  

 

 

(Ropes, warning signs).

4.

 

 

Whistle (for collaboration or  

 

 

 emergency).

5.

 

 

Hatchet or saw (for removal of    

  obstacles).

6. 

 

Never use the product whe n wearing 

 

 

sandals, or when barefoot.

WARNING CONSIDERING 

HANDLING OF FUEL

a. 

The engine of this product is designed to run on a 

mixed fuel which contains highly

flammable gasoline. Never store cans of fuel or refill 

the fuel tank in any place where

 

 

there is a boiler, stove, wood

 

 

fire, electrical sparks, welding

 

 

sparks, or any other source of

heat or fire which might ignite the fuel.

b.

  Smoking while operating the product or refilling 

its fuel tank is extremely dangerous. Always be sure 

to keep lit cigarettes away from the product at all 

times.

 

 

BEFORE USING THE MACHINE

a. Read this owner’s manual 
carefully to understand how to 
operate this unit properly.

b. You should never use the product 
when under the influence of alcohol,
when suffering from exhaustion or 
lack of sleep, when suffering from 
drowsiness as a result of having 
taken cold medicine, or at any other 
time when a possibility exists that 
your judgment might be impaired or 
that you might not be able to operate 
the machine properly and in a safe 
manner.

c. Avoid running the engine indoors. 
The exhaust gases contain harmful 
carbon monoxide.

d. Never use the product under 
circumstances like those described 
below:
1. When the ground is slippery or 
when other conditions exist which 
might make it not possible to 
maintain a steady posture.
2. At night, at times of heavy fog, or 
at any other times when your field of 
vision might be limited and it would 
be difficult to gain a clear view of the 
area.
3. During rain storms, during 
lightning storms, at times of strong 
or gale-force winds, or at any other 
times when weather conditions 
might make it unsafe to use this 
product.

e. When using this product for the 
first time, before beginning actual 
work, learn to handling it from 
skilled worker.

f. Lack of sleep, tiredness, or 
physical exhaustion results in lower 
attention spans, and this in turn 
leads to accidents and injury. Limit 
the amount of time of using the 
machine continuously to 
somewhere around 10 minutes pre 
session, and take 10-20 minutes of 
rest between work sessions. Also 
try to keep the total amount of work 
performed in a single day under 2 
hours or less.     
g. Be sure to keep this manual 
handy so that you may refer to it 
later whenever any questions arise.
h. Always be sure to include this 
manual when selling, lending, or 
otherwise transferring the 
ownership of this product.
i. Never allow children or anyone 
unable to fully understand the 
directions given in this manual to 
use this product.

■WORKING GEAR AND CLOTHI

NG 

a. When using the product, you 
should wear proper clothing and 
protective equipment as follows.
WORK CLOTHES
(1) Helmet
(2) Protection goggles or face 
protector
(3) Thick work gloves
(4) Non-slip-sole work boots 
(5) Ear protectors
b. And you should carry with you.
1. Attached tools and files.
2.Properly reserved fuel and chain 
oil.
3.Things to notify your working area 
(Rope,
warning signs)
4.Whistle (for collaboration or 
emergency)
5.Hatchet or saw (for removal of 
obstacles)
c. Never use the product when 
wearing pants with
loose cuffs, when wearing sandals, 
or when barefoot.

1.

  

 

Read this owner’s manual   

 

 

carefully to understand how  

 

 

to operate this unit properly.

2.

  

 

You should never use the

 

 

product when under the    

 

 

influence of alcohol, when   

 

 

suffering from exhaustion or 

lack of sleep, when suffering from     

    

drowsiness as a result of having taken        

cold medicine, or at any other time when  

a possibility exists that your judgment    

might be impaired or that you might not

be able to operate the machine properly      

and in a safe manner.

3.

  

 

Avoid running the engine    

 

 

indoors. The exhaust gases  

 

 

contain harmful carbon    

  monoxide.

4.

  Never use the product under    

 

circumstances like those described below:

a. 

When the ground is slippery or when 

other conditions exist which might make it 

not possible to maintain a steady posture.

b.

  At night, at times of heavy fog, or at any 

other times when your field of vision might 

be limited and it would be difficult to gain a 

clear view of the area.

c.

  During rain storms, during lightning 

storms, at times of strong or gale-force 

winds, or at any other times when weather 

conditions might make it unsafe to use this 

product.

5.

   When using this product for the first 

time, before beginning actual work, learn to 

handle the machine from a skilled worker.

6.

 

Lack of sleep, tiredness, or physical 

exhaustion results in lower attention spans, 

and this in time can lead to accidents and 

injury. Limit the amount of time using the 

machine continuously to somewhere around 

10 minutes per session, and take 10-20 

minutes of rest between work sessions. 

Also try to keep the total amount of work 

performed in a single day under 2 hours or 

less.   

BEFORE USING THE MACHINE

 

 

BEFORE USING THE MACHINE

a. Read this owner’s manual 
carefully to understand how to 
operate this unit properly.

b. You should never use the product 
when under the influence of alcohol,
when suffering from exhaustion or 
lack of sleep, when suffering from 
drowsiness as a result of having 
taken cold medicine, or at any other 
time when a possibility exists that 
your judgment might be impaired or 
that you might not be able to operate 
the machine properly and in a safe 
manner.

c. Avoid running the engine indoors. 
The exhaust gases contain harmful 
carbon monoxide.

d. Never use the product under 
circumstances like those described 
below:
1. When the ground is slippery or 
when other conditions exist which 
might make it not possible to 
maintain a steady posture.
2. At night, at times of heavy fog, or 
at any other times when your field of 
vision might be limited and it would 
be difficult to gain a clear view of the 
area.
3. During rain storms, during 
lightning storms, at times of strong 
or gale-force winds, or at any other 
times when weather conditions 
might make it unsafe to use this 
product.

e. When using this product for the 
first time, before beginning actual 
work, learn to handling it from 
skilled worker.

f. Lack of sleep, tiredness, or 
physical exhaustion results in lower 
attention spans, and this in turn 
leads to accidents and injury. Limit 
the amount of time of using the 
machine continuously to 
somewhere around 10 minutes pre 
session, and take 10-20 minutes of 
rest between work sessions. Also 
try to keep the total amount of work 
performed in a single day under 2 
hours or less.     
g. Be sure to keep this manual 
handy so that you may refer to it 
later whenever any questions arise.
h. Always be sure to include this 
manual when selling, lending, or 
otherwise transferring the 
ownership of this product.
i. Never allow children or anyone 
unable to fully understand the 
directions given in this manual to 
use this product.

■WORKING GEAR AND CLOTHI

NG 

a. When using the product, you 
should wear proper clothing and 
protective equipment as follows.
WORK CLOTHES
(1) Helmet
(2) Protection goggles or face 
protector
(3) Thick work gloves
(4) Non-slip-sole work boots 
(5) Ear protectors
b. And you should carry with you.
1. Attached tools and files.
2.Properly reserved fuel and chain 
oil.
3.Things to notify your working area 
(Rope,
warning signs)
4.Whistle (for collaboration or 
emergency)
5.Hatchet or saw (for removal of 
obstacles)
c. Never use the product when 
wearing pants with
loose cuffs, when wearing sandals, 
or when barefoot.

 

 

BEFORE USING THE MACHINE

a. Read this owner’s manual 
carefully to understand how to 
operate this unit properly.

b. You should never use the product 
when under the influence of alcohol,
when suffering from exhaustion or 
lack of sleep, when suffering from 
drowsiness as a result of having 
taken cold medicine, or at any other 
time when a possibility exists that 
your judgment might be impaired or 
that you might not be able to operate 
the machine properly and in a safe 
manner.

c. Avoid running the engine indoors. 
The exhaust gases contain harmful 
carbon monoxide.

d. Never use the product under 
circumstances like those described 
below:
1. When the ground is slippery or 
when other conditions exist which 
might make it not possible to 
maintain a steady posture.
2. At night, at times of heavy fog, or 
at any other times when your field of 
vision might be limited and it would 
be difficult to gain a clear view of the 
area.
3. During rain storms, during 
lightning storms, at times of strong 
or gale-force winds, or at any other 
times when weather conditions 
might make it unsafe to use this 
product.

e. When using this product for the 
first time, before beginning actual 
work, learn to handling it from 
skilled worker.

f. Lack of sleep, tiredness, or 
physical exhaustion results in lower 
attention spans, and this in turn 
leads to accidents and injury. Limit 
the amount of time of using the 
machine continuously to 
somewhere around 10 minutes pre 
session, and take 10-20 minutes of 
rest between work sessions. Also 
try to keep the total amount of work 
performed in a single day under 2 
hours or less.     
g. Be sure to keep this manual 
handy so that you may refer to it 
later whenever any questions arise.
h. Always be sure to include this 
manual when selling, lending, or 
otherwise transferring the 
ownership of this product.
i. Never allow children or anyone 
unable to fully understand the 
directions given in this manual to 
use this product.

■WORKING GEAR AND CLOTHI

NG 

a. When using the product, you 
should wear proper clothing and 
protective equipment as follows.
WORK CLOTHES
(1) Helmet
(2) Protection goggles or face 
protector
(3) Thick work gloves
(4) Non-slip-sole work boots 
(5) Ear protectors
b. And you should carry with you.
1. Attached tools and files.
2.Properly reserved fuel and chain 
oil.
3.Things to notify your working area 
(Rope,
warning signs)
4.Whistle (for collaboration or 
emergency)
5.Hatchet or saw (for removal of 
obstacles)
c. Never use the product when 
wearing pants with
loose cuffs, when wearing sandals, 
or when barefoot.

 

 

BEFORE USING THE MACHINE

a. Read this owner’s manual 
carefully to understand how to 
operate this unit properly.

b. You should never use the product 
when under the influence of alcohol,
when suffering from exhaustion or 
lack of sleep, when suffering from 
drowsiness as a result of having 
taken cold medicine, or at any other 
time when a possibility exists that 
your judgment might be impaired or 
that you might not be able to operate 
the machine properly and in a safe 
manner.

c. Avoid running the engine indoors. 
The exhaust gases contain harmful 
carbon monoxide.

d. Never use the product under 
circumstances like those described 
below:
1. When the ground is slippery or 
when other conditions exist which 
might make it not possible to 
maintain a steady posture.
2. At night, at times of heavy fog, or 
at any other times when your field of 
vision might be limited and it would 
be difficult to gain a clear view of the 
area.
3. During rain storms, during 
lightning storms, at times of strong 
or gale-force winds, or at any other 
times when weather conditions 
might make it unsafe to use this 
product.

e. When using this product for the 
first time, before beginning actual 
work, learn to handling it from 
skilled worker.

f. Lack of sleep, tiredness, or 
physical exhaustion results in lower 
attention spans, and this in turn 
leads to accidents and injury. Limit 
the amount of time of using the 
machine continuously to 
somewhere around 10 minutes pre 
session, and take 10-20 minutes of 
rest between work sessions. Also 
try to keep the total amount of work 
performed in a single day under 2 
hours or less.     
g. Be sure to keep this manual 
handy so that you may refer to it 
later whenever any questions arise.
h. Always be sure to include this 
manual when selling, lending, or 
otherwise transferring the 
ownership of this product.
i. Never allow children or anyone 
unable to fully understand the 
directions given in this manual to 
use this product.

■WORKING GEAR AND CLOTHI

NG 

a. When using the product, you 
should wear proper clothing and 
protective equipment as follows.
WORK CLOTHES
(1) Helmet
(2) Protection goggles or face 
protector
(3) Thick work gloves
(4) Non-slip-sole work boots 
(5) Ear protectors
b. And you should carry with you.
1. Attached tools and files.
2.Properly reserved fuel and chain 
oil.
3.Things to notify your working area 
(Rope,
warning signs)
4.Whistle (for collaboration or 
emergency)
5.Hatchet or saw (for removal of 
obstacles)
c. Never use the product when 
wearing pants with
loose cuffs, when wearing sandals, 
or when barefoot.

 

 

BEFORE USING THE MACHINE

a. Read this owner’s manual 
carefully to understand how to 
operate this unit properly.

b. You should never use the product 
when under the influence of alcohol,
when suffering from exhaustion or 
lack of sleep, when suffering from 
drowsiness as a result of having 
taken cold medicine, or at any other 
time when a possibility exists that 
your judgment might be impaired or 
that you might not be able to operate 
the machine properly and in a safe 
manner.

c. Avoid running the engine indoors. 
The exhaust gases contain harmful 
carbon monoxide.

d. Never use the product under 
circumstances like those described 
below:
1. When the ground is slippery or 
when other conditions exist which 
might make it not possible to 
maintain a steady posture.
2. At night, at times of heavy fog, or 
at any other times when your field of 
vision might be limited and it would 
be difficult to gain a clear view of the 
area.
3. During rain storms, during 
lightning storms, at times of strong 
or gale-force winds, or at any other 
times when weather conditions 
might make it unsafe to use this 
product.

e. When using this product for the 
first time, before beginning actual 
work, learn to handling it from 
skilled worker.

f. Lack of sleep, tiredness, or 
physical exhaustion results in lower 
attention spans, and this in turn 
leads to accidents and injury. Limit 
the amount of time of using the 
machine continuously to 
somewhere around 10 minutes pre 
session, and take 10-20 minutes of 
rest between work sessions. Also 
try to keep the total amount of work 
performed in a single day under 2 
hours or less.     
g. Be sure to keep this manual 
handy so that you may refer to it 
later whenever any questions arise.
h. Always be sure to include this 
manual when selling, lending, or 
otherwise transferring the 
ownership of this product.
i. Never allow children or anyone 
unable to fully understand the 
directions given in this manual to 
use this product.

■WORKING GEAR AND CLOTHI

NG 

a. When using the product, you 
should wear proper clothing and 
protective equipment as follows.
WORK CLOTHES
(1) Helmet
(2) Protection goggles or face 
protector
(3) Thick work gloves
(4) Non-slip-sole work boots 
(5) Ear protectors
b. And you should carry with you.
1. Attached tools and files.
2.Properly reserved fuel and chain 
oil.
3.Things to notify your working area 
(Rope,
warning signs)
4.Whistle (for collaboration or 
emergency)
5.Hatchet or saw (for removal of 
obstacles)
c. Never use the product when 
wearing pants with
loose cuffs, when wearing sandals, 
or when barefoot.

 

 

BEFORE USING THE MACHINE

a. Read this owner’s manual 
carefully to understand how to 
operate this unit properly.

b. You should never use the product 
when under the influence of alcohol,
when suffering from exhaustion or 
lack of sleep, when suffering from 
drowsiness as a result of having 
taken cold medicine, or at any other 
time when a possibility exists that 
your judgment might be impaired or 
that you might not be able to operate 
the machine properly and in a safe 
manner.

c. Avoid running the engine indoors. 
The exhaust gases contain harmful 
carbon monoxide.

d. Never use the product under 
circumstances like those described 
below:
1. When the ground is slippery or 
when other conditions exist which 
might make it not possible to 
maintain a steady posture.
2. At night, at times of heavy fog, or 
at any other times when your field of 
vision might be limited and it would 
be difficult to gain a clear view of the 
area.
3. During rain storms, during 
lightning storms, at times of strong 
or gale-force winds, or at any other 
times when weather conditions 
might make it unsafe to use this 
product.

e. When using this product for the 
first time, before beginning actual 
work, learn to handling it from 
skilled worker.

f. Lack of sleep, tiredness, or 
physical exhaustion results in lower 
attention spans, and this in turn 
leads to accidents and injury. Limit 
the amount of time of using the 
machine continuously to 
somewhere around 10 minutes pre 
session, and take 10-20 minutes of 
rest between work sessions. Also 
try to keep the total amount of work 
performed in a single day under 2 
hours or less.     
g. Be sure to keep this manual 
handy so that you may refer to it 
later whenever any questions arise.
h. Always be sure to include this 
manual when selling, lending, or 
otherwise transferring the 
ownership of this product.
i. Never allow children or anyone 
unable to fully understand the 
directions given in this manual to 
use this product.

■WORKING GEAR AND CLOTHI

NG 

a. When using the product, you 
should wear proper clothing and 
protective equipment as follows.
WORK CLOTHES
(1) Helmet
(2) Protection goggles or face 
protector
(3) Thick work gloves
(4) Non-slip-sole work boots 
(5) Ear protectors
b. And you should carry with you.
1. Attached tools and files.
2.Properly reserved fuel and chain 
oil.
3.Things to notify your working area 
(Rope,
warning signs)
4.Whistle (for collaboration or 
emergency)
5.Hatchet or saw (for removal of 
obstacles)
c. Never use the product when 
wearing pants with
loose cuffs, when wearing sandals, 
or when barefoot.

Summary of Contents for CS4610

















Reviews: