4
1
.
Carefully read the
operator’s manual before
operating this machine.
2.
Wear head, eye and ear
protection.
3.
Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
4.
Warning!
Kickback it’s dangerous.
5.
Warning!
The words WARNING calls
attentions to an act or a
condition which can lead to
serious personal injury or
death.
6.
Chain brake operation.
7.
Do not expose to rain! Do
not operate the machine on
wet
ground.
8.
Circle and slash symbol
means whatever shown is
prohibited.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these indications,
please be careful not to take a mistake.
a.
The port to refuel the
“MIXGASOLINE”.
Position:
fuel tank cap
b.
The port to refuel the
“CHAIN
OIL”.
Position:
oil cap
c.
The indication regarding the
switch. Flipping the engine
switch to the “O”(STOP)
direction, the engine stops.
Position:
rear-left of the
unit.
d.
The indication regarding the
choke. Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the choke opens.
Position:
rear-right of the
unit.
e.
The indication regarding the
chain oil adjuster nut.
“MIN” direction-the oil
flow decrease “MAX”
direction-the oil flow
increase.
Position:
starter case of the
unit.
f.
The position of H-needle
The position of L-needle
The position of idle adjusting
screw
Position:
cylinder cover
of the unit Engine Manual
start.
Position:
starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
(1)Carefully read owner’s
manual before operating
this machine.
(2)Wear head ,eye and ear
protection.
(3)Use the chain saw with
two hands; one handed
operation of the saw
can be dangerous.
(4)Warning ! kickback it’s
dangerous
(5)Warning
The words WARNING
calls
attentions to an act or a
condition which can lead
to serious personal injury
or death.
(6) Chain brake operation.
(7) Do not expose to rain!
Do not operate the
machine on wet ground.
(8)
Circle and slash symbol
means whatever shown
is prohibited.
For safe operation and maintenance,
symbols are carved in relief on the
machine. According to these
indications, please be careful not to
take a mistake.
(a). The port to refuel the
“MIXGASOLINE”
Position: fuel tank cap
(b). The port to refuel the
“CHAIN OIL”
Position: oil cap
(c). The indication
regarding the switch.
Flipping the engine switch
to the “O”(STOP) direction,
the engine stops.
Position: rear-left of the
unit
(d).
The indication regarding
the choke.
Pulling out the choke
knob, the choke closes.
Pushing in the choke knob,
the chock opens.
Position: rear-right of the
unit
(e).
The indication regarding
the chain oil adjuster nut.
“MIN” direction-the oil
flow decrease
“MAX” direction-the oil
flow increase.
Position: starter case of the
unit.
(f).
The position of H-needle
The position of L-needle
The position of idle
adjusting screw
Position: cylinder cover of
the unit
Engine Manual start.
Position: starter knob.
