9
DESCRIPTION
CUTTING
1.
OPERATOR’S MANUAL –
Included with
unit. Read before operation and keep for
future reference to learn proper, safe operating
techniques.
2.
FRONT HAND GUARD –
Guard between the
front handle and the saw chain for protecting the
hand from injuries and aiding in control of the
chain saw if the hand slips off the handle. This
guard is used to activate the chain brake which
is to stop the saw chain rotation.
3.
REAR HANDLE (FOR THE RIGHT HAND) –
Support handle located towards the rear of the
engine housing.
4.
THROTTLE TRIGGER LOCKOUT –
A
safety lever which must be depressed before
the throttle trigger can be activated in order to
prevent the accidental operation of the throttle
trigger.
5.
REAR HAND GUARD –
Extension on the
lower part of the rear handle for protecting the
hand from the chain if it breaks or degrooves.
6.
THROTTLE TRIGGER –
Device activated by
the operator’s finger, for controlling the engine
speed.
7.
CHOKE CONTROL KNOB –
Device for
enriching the fuel/air mixture in the carburettor to
aid cold starting.
8.
CLUTCH COVER –
Protective cover to the
guide bar, saw chain, clutch and sprocket when
the chain saw in use.
9.
CHAIN TENSION ADJUSTER –
This is
device to adjust chain tension.
10.
CHAIN CATCHER –
A projection designed
to reduce the risk of the operator’s right hand
from being hit by a chain which has broken or
derailed from the guide bar during cutting.
11.
SPIKED BUMPER –
Devise, fitted in front of
the guide bar mounting point, acting as a pivot
when in contact with a tree or log.
12.
GUIDE BAR –
The part that supports and
guide the saw chain.
13.
CHAIN –
Chain, serving as a cutting tool.
14.
CYLINDER COVER –
The cooling air flow
grill. It covers the cylinder, spark plug, silencer
and air cleaner.
15.
FRONT HANDLE (FOR THE LEFT HAND)
–
Support handle located at the front of the
engine housing.
16.
OIL TANK CAP –
For closing the oil tank.
17.
STARTER HANDLE –
The grip of the
starter, for starting the engine.
18.
FUEL TANK CAP –
For closing the fuel
tank.
19.
IGNITION SWITCH –
Device for connecting
and disconnecting the ignition system and thus
allowing the engine to be started or stopped.
20.
AIR CLEANER COVER –
Covers air filter.
21.
CLEANER COVER KNOB –
Device for
installing the air cleaner cover.
22.
GUIDE BAR COVER –
Remove device for
covering the guide bar and saw chain during
transport and other times when the chain saw is
not in use
4
3
2
13
12
11
10
9
8
7
6
5
Summary of Contents for CS4020
Page 1: ...1 CHAINSAW CS4020 OPERATOR S MANUAL ...
Page 23: ...23 NOTES ...